FM-KICK Mirror

See the FM-1's screen and panel live on your computer.

You need Chrome or Edge, and the FM-1 running FM-KICK plugged in with a USB cable. When you press Connect, the browser asks for permission to use MIDI devices: allow it.

Not connected.

Beta software: use it at your own risk

FM-KICK is a beta, made by one person for the M-VAVE FM-1 and not by M-VAVE. It can have bugs and fail: it can behave wrongly, lose what you saved, or leave the FM-1 not starting until you install a firmware again. This page writes to the FM-1 (the project and backup restore), so the same applies to it.

FM-KICK is provided “as is”, without warranty of any kind, as the MPL-2.0 licence says (sections 6 and 7). The author is not responsible for any damage to your FM-1, your data or anything connected to it, and does not give support for it. By using FM-KICK and this page you accept that.

Render Audio

Render a pattern to audio in this browser with FM-KICK's own sound engine, then play it, save it as a WAV file or drag it into your DAW. The FM-1 sends its patterns over USB (as for a backup); nothing is written to it. With the effects, or the kick dry.

Projects and backup

Save a project from the FM-1 to a file on this computer, or put a project file into any of its four slots (GLO's PROJECTS page on the FM-1). You can also save everything FM-KICK keeps (the patterns, the user kicks, the settings and the projects) and load it back later. This needs FM-KICK 0.5.1 or later on the FM-1, connected above. The screen stops for a few seconds while the FM-1 sends or takes the data.

Connect to the FM-1 above first.

Projects

    A project file holds a project's 48 patterns (banks A to C, each with its kick), its tempo and its effects. It can go into any slot, and into any FM-1 running FM-KICK. To put one in, the sequencer must be stopped. The FM-1 then asks you to press SEL to confirm, or HOME to cancel. Load it on the FM-1 afterwards (GLO, PROJECTS, LOAD) to play it.

    Everything

    A backup does not hold the button calibration, which belongs to the FM-1. Loading a backup replaces everything FM-KICK has saved, and the FM-1 asks you to confirm with SEL first. A cut cable or a damaged file changes nothing.

    How

    1. Plug the FM-1 running FM-KICK into this computer.
    2. Open this page in Chrome or Edge. Press Connect and allow MIDI with SysEx.
    3. The page finds FM-KICK by itself. If it doesn't, choose its ports (named after FM-KICK or the FM-1) in both lists above.

    What you see

    The screen updates as FM-KICK draws it. Buttons and keys light up as their LEDs do, bright or glowing. Held ones are outlined in teal. A knob you turn flashes and shows its steps. If you unplug the FM-1 or it sleeps, the page waits and reconnects.

    Control (for testing)

    Turn on Control to play the FM-1 from this page. Click a button or key, and it stays pressed while you hold the mouse. Scroll over a knob to turn it. With the keyboard, Tab to a button or key on the panel and hold Space or Enter to hold it; on a knob, the arrow keys turn it. When you turn Control off, close the page or unplug the cable, FM-KICK lets go of everything. Scripts can play the panel too, with fm1-base's tools/fm1_remote.py.

    Screen reader

    This page shows the screen as a picture. To hear what it says, open the FM-1 Screen Reader in another tab: it reads FM-KICK's screen with your own screen reader or its own voice, and it can run beside this page.

    Speed

    FM-KICK sends the screen after the notes and the clock, so the music always comes first. When the computer is busy, the page skips frames, but the picture always catches up.